Home › Printing machines › Die-cutting and stripping machines › Dual-unit die-cutting and stripping machine Guowang S106Q

Dual-unit die-cutting and stripping machine Guowang S106Q

Dual-unit die-cutting and stripping machine Guowang S106Q

GUOWANG S106Q – Dual-unit die-cutting and stripping machine

Round-the-clock production: virtually no production downtime caused by foil breaks. No process adjustments are required during production. The unique ergonomic design shortens installation time.

Superior versatility: Supports hot stamping, embossing and holographic pattern application. Suitable for hot stamping a wide range of materials, including diffraction stamping with complex structured images.

Independent temperature zone control: The machine features 20 independently controlled temperature zones for separate heating and temperature regulation, delivering energy-saving performance.

Time-saving ergonomics: fast changeover from hot stamping to die-cutting. Virtually no downtime due to foil breaks. Equipped with a dedicated system for efficient production data management.

Versotrade s.r.o. is the official representative of the manufacturer GUOWANG (Guowang Group). We provide delivery, transport, installation, operator training as well as warranty and post-warranty service.

Interested in this machine? Write to us and we will prepare an offer.

Send an inquiry
Feeder section

Feeder section

In-house developed 4-suction, 4-feeder head feeds various stocks reliably; the pre-stacking device supports a pile height of 1600 mm without stopping the machine.

Paper conveying belt

Paper conveying belt

The paper feeding belt, with 6 imported front drive shafts and a German cross steel plate, guarantees flat paper conveyance.

Non-stop switching between the main and auxiliary feeding platforms

Non-stop switching between the main and auxiliary feeding platforms

Main and auxiliary feeding platforms support non-stop switching to save paper loading time and boost overall productivity.

Machine body section

Machine body section

5 main frames redesigned by German and Japanese engineers, Mitsubishi 5-face machining, ±0.01 mm tolerance, maximum die-cutting pressure of 550–600 t.

Main unit

Main unit

The main frame is made of premium materials. A high-efficiency, self-locking worm drive with a large reduction ratio and central metered lubrication reduce wear.

Machine base

Machine base

The integral cast base resists deformation, and the tongue-and-groove keyway connection ensures vertical balance during adjustment.

Pneumatic upper and lower lock

Pneumatic upper and lower lock

SMC pneumatic cylinders lock the upper and lower die frames firmly to prevent losses caused by manual operating errors.

Gripper bar section

Gripper bar section

Hard-anodized aerospace aluminum gripper bars with a flatness of ±0.05 mm, CMM inspected; Japanese gripper tips last 3 years.

Integrated electrical system

Integrated electrical system

The machine uses well-known brand electrical components to ensure stable long-term operation.

Transmission shaft

Transmission shaft

A high-torque drive shaft with dynamically balanced couplings ensures smooth, vibration-free operation and synchronous running of both units.

Feeder air valve assembly

Feeder air valve assembly

A precision air valve adjusts airflow to feed thin special paper stably, avoiding paper wrinkles, offset and feeding malfunctions.

Dual position adjustment for gripper bars

Dual position adjustment for gripper bars

Dual positioning screws allow quick, precise and easy adjustment of the gripper bars of both stations.

Thickened side wall plates

Thickened side wall plates

Heavy-duty thickened side plates and worm gears made of QT500-7 ductile iron with high tensile strength ensure stable operation.

Belt transmission

Belt transmission

Taiwanese intermittent mechanism with belt drive, running more smoothly than traditional chain transmission.

Automatic lubrication of cams and chains

Automatic lubrication of cams and chains

Automatic lubrication of cams and chains with uniform, precise oil supply and no manual work, increasing machine efficiency.

Miki clutch

Miki clutch

Equipped with a Miki clutch to control the feeding belt, allowing one unit to run while the other stands by.

Equipped with torque limiter

Equipped with torque limiter

A torque limiter protects the gripper bars from secondary collision for safe, stable and efficient production.

Integral machine base

Integral machine base

The highly rigid integral cast base absorbs die-cutting impact, and the adjustable clearance allows precise die-cutting.

Safety light curtain

Safety light curtain

A built-in high-safety light curtain monitors the danger zone, and the machine stops instantly to prevent accidents.

Hot stamping system

Hot stamping system

Energy-saving 20-zone heater with French sensors and Omron PID control (±1 °C), preheating function and automatic foil consumption calculation.

6 vertical and 6 holographic stamping lanes

6 vertical and 6 holographic stamping lanes

Simultaneous stamping of 6 vertical and 6 holographic lanes supports multiple processes in a single pass and raises equipment utilization.

ModelS106Q
Paper sizeMin. 450×370 mm
Max. 1060×760 mm
Paper specificationCardboard: 0.1–3 mm
Corrugated board: ≤4 mm
White cardboard: 90–2000 g/m²
Maximum die-cutting width1045×745 mm
Grip blank range9-17 mm
Maximum die-cutting pressure of unit 1300 t
Maximum die-cutting pressure (unit 2)300 t
Maximum die-cutting speed6500 sheets/h
Die-cutting accuracy≤±0.075 mm
Stack height (incl. pallet)1600 mm
Stack height (incl. pallet)1350 mm
Die chase inner dimensions1100×770 mm
Compressed air requirements6–8 bar; 600 L/min
Main motor power22 kW
Maximum machine power35 kW
Gross weight (including footboard)38 t
External dimensions8500×5400×2600 mm

No video is available yet. We will gladly show and explain everything – write to us.

Send an inquiry
CATALOGUE
MACHINES
Sublimation printers
DTG printers
Eco-solvent printers
UV printers
Box makers
Screen printing and cold foil
Digital printing
Die-cutting and stripping machines
Folder-gluers
Flexo printing machines
Cutting plotters
Laminating machines
Gluing systems
Calendar binding and punching
Laser die-cutting machines
Coating machines
Slitters
Strapping machines
Cutters
Rewinders
Tape applicators
Creasing and perforating machines
Collating machines
Book edge printing
Window patching machines
Die-cutting machines with hot foil stamping
Inspection machines
Sheet-fed offset presses
Paper bag and sack making machines
Accessories
Saddle stitch booklet makers
Perfect binders
Sheeters