A Taiwanese feeder with 4 suction cups for lifting and 4 suction cups for transfer ensures stable and fast paper feeding.
Preload device and non-stop feeding function, with a maximum pile height of up to 1600 mm.
A rail-guided preload device enables operators to move the prepared pile to the feeder accurately and conveniently.
The side lays can be switched from pull lays to push lays to suit different formats.
Paper feeding slows down as the paper approaches the front lays to achieve more accurate paper alignment.
Versotrade s.r.o. is the official representative of the manufacturer GUOWANG (Guowang Group). We provide delivery, transport, installation, operator training as well as warranty and post-warranty service.
Interested in this machine? Write to us and we will prepare an offer.
Send an inquiry
The self-developed 4-suction, 4-feed feeder delivers stable, fast paper feeding for various stocks, and pre-stacking up to 1600 mm enables non-stop operation.

Six imported front drive belts matched with German cross steel plates ensure flat, smooth paper transportation.

Five core components are machined on a Mitsubishi 5-face machining center with imported hydraulic fixtures, keeping the cumulative tolerance within ±0.01 mm.

The precision-manufactured main unit uses a worm drive with high transmission efficiency, reliable self-locking and a large reduction ratio.

SMC pneumatic cylinders lock the die frames and bottom plates firmly, preventing improper installation and losses caused by manual operating errors.
| Model | E106 |
| Paper size | Min. 450×370 mm Max. 1060×740 mm |
| Paper specifications | Paperboard: 0.1–3 mm Corrugated board: ≤4 mm White cardstock: 90–2000 g/m² |
| Gripper margin | 7-17 mm |
| Maximum die-cutting area | 1045×740 mm |
| Maximum die-cutting pressure | 300 t |
| Maximum die-cutting speed | 7500 sheets/h |
| Feeder pile height (including pallet) | 1550 mm |
| Delivery pile height (including pallet) | 1350 mm |
| Die-cutting accuracy | ≤ ±0.075 mm |
| Compressed air requirements | 6–8 bar; 200 L/min |
| Main motor power | 11 kW |
| Maximum total power | 20 kW |
| Total weight | 17 t |
| Overall dimensions (excluding inspection table; including footboard) | 5200×4120×2330 mm |
| Inner dimensions of die chase | 1100×770 mm |
No video is available yet. We will gladly show and explain everything – write to us.
Send an inquiry