Home › Printing machines › Die-cutting machines with hot foil stamping › Dual-unit hot foil stamping and die-cutting machine Guowang SR92YY

Dual-unit hot foil stamping and die-cutting machine Guowang SR92YY

Dual-unit hot foil stamping and die-cutting machine Guowang SR92YY

GUOWANG SR92YY – Double-unit hot stamping and die-cutting machine

4 suction cups for lifting and 4 suction cups for transfer ensure stable and fast paper feeding.

Preload device and non-stop feeding function, with a maximum pile height of up to 1600 mm (with plate)

A rail-guided preload device enables operators to move the prepared pile to the feeder accurately and conveniently.

The side lays can be switched from pull lays to push lays to suit different formats.

Precise registration photocells with adjustable sensitivity are fitted on the side and front lays.

Versotrade s.r.o. is the official representative of the manufacturer GUOWANG (Guowang Group). We provide delivery, transport, installation, operator training as well as warranty and post-warranty service.

Interested in this machine? Write to us and we will prepare an offer.

Send an inquiry
Feeder section

Feeder section

The self-developed 4-suction, 4-feed feeder suits various papers, and pre-stacking allows a pile height of 1600 mm without stopping the machine.

Feeding belt

Feeding belt

Six imported front drive shafts with German cross steel plates ensure the paper conveyor belts run flat.

Speed regulation device for the feeding section

Speed regulation device for the feeding section

Adjustable fast-slow feeding suits all paper thicknesses and prevents wrinkling and deviation to cut waste.

Feeder air valve device

Feeder air valve device

The feeder air valve adjusts airflow to stabilize special thin paper, avoid wrinkling and offset, and reduce feeding failures.

Electric paper feeding table

Electric paper feeding table

The electric feeder table runs stably and precisely. The digital panel allows one-click parameter adjustment for various paper sizes.

Electric side blower

Electric side blower

An electric side blower delivers precise airflow to prevent thin paper from shifting, reduces downtime and suits all types of paper.

Electric adjustment of feeder position

Electric adjustment of feeder position

Electrically controlled feeder position adjustment adapts quickly to various papers, reducing manual adjustment time and errors.

Lower suction paper feeding belt

Lower suction paper feeding belt

The bottom suction belt holds the paper steadily, with adjustable negative pressure for stable feeding of all paper types.

Machine body section

Machine body section

Five core frames machined on a Mitsubishi 5-face machining center, ±0.01 mm tolerance, optimized for a die-cutting pressure of 320 t.

Main unit

Main unit

The main unit uses a high-efficiency, self-locking worm drive. Metered lubrication of the inner shaft reduces component wear.

Bottom air suction structure

Bottom air suction structure

Bottom air suction stabilizes light paper for neat delivery and adapts to high-speed operation and various paper stocks.

Pneumatic upper and lower locking device

Pneumatic upper and lower locking device

Pneumatic locks with SMC cylinders secure the die frames and prevent incorrect mounting and losses caused by manual operation.

Machine base

Machine base

The integral cast base resists deformation. The concave-convex keyway joint ensures perfect vertical balance during adjustment.

Gripper bar section

Gripper bar section

Aerospace aluminum gripper bars with ±0.05 mm flatness and ±0.25 mm tolerance; Japanese gripper pads with a 3-year guarantee.

Automatic central lubrication system

Automatic central lubrication system

Automatic centralized lubrication covers all key parts and adjusts the oil supply dynamically to reduce wear without manual work.

Transmission shaft

Transmission shaft

Precision-balanced couplings enable smooth, low-wear operation, and an optimized gear ratio keeps the units fully synchronized at high speed.

Vertical air flotation shaft

Vertical air flotation shaft

A contact-free vertical air flotation shaft avoids foil abrasion and cuts material waste and maintenance workload.

Horizontal rolling foil passing shaft

Horizontal rolling foil passing shaft

The horizontal rolling foil shaft needs no air supply and is easy to maintain, with low-friction, smooth foil transport.

Hot stamping system

Hot stamping system

20 heating zones with ±1 °C precision control, preset heating time and automatic foil consumption calculation for energy savings.

Automatic side lay

Automatic side lay

The automatic side lay ensures precise lateral alignment; easy adjustment reduces downtime and improves processing accuracy.

Foil break detection

Foil break detection

Twelve distributed sensors provide full-range foil break detection, increasing product yield and production stability.

Holographic positioning hot stamping

Holographic positioning hot stamping

A relocated foil bracket shortens the foil path to reduce tension loss and improve the registration precision of holographic hot stamping.

6 vertical lanes holographic stamping

6 vertical lanes holographic stamping

6 vertical holographic stamping units work simultaneously to complete multi-area foiling at once, shortening the production cycle.

Two horizontal foil unwinding shafts

Two horizontal foil unwinding shafts

Two independent transverse foil unwinding shafts hold two foils evenly for multi-color and layered hot stamping processes.

Electric front lay

Electric front lay

The electric front lay is controlled electrically for millimeter-accurate adjustment via dual screens, eliminating manual errors.

Electric auxiliary delivery

Electric auxiliary delivery

The electric auxiliary delivery switches automatically with the main delivery for stable paper collection without misalignment.

Electric paper delivery brush

Electric paper delivery brush

An electric brush with adjustable height and speed is linked to the feeding system to flatten all paper smoothly without jams.

Sample inspection table

Sample inspection table

A 50-inch HD sample viewing bench supports real-time data synchronization, integrating sampling, parameter setting and production monitoring.

Foil take-up brush

Foil take-up brush

Six brushes ensure stable foil rewinding at high speed to meet the demands of high-volume, high-efficiency production.

Safety light curtain

Safety light curtain

A built-in high-safety light curtain monitors the working area and stops the machine instantly to protect operators.

Electrical integration

Electrical integration

This machine is equipped with electrical components from well-known brands to ensure stable and consistent equipment operation.

Paper sizeMin. 340×340 mm
Max. 920×650 mm
Maximum die-cutting area910×630 mm
Max. hot stamping area900×600 mm
Gripper margin9-17 mm
Maximum die-cutting pressure300 t (unit 1)
300 t (unit 2)
Paper specificationsPaperboard: 0.1–3 mm
Corrugated board: ≤4 mm
White paperboard: 90–2000 g/m²
Maximum die-cutting speed7000 sheets/h
Maximum hot stamping speed6500 sheets/h
Maximum holographic stamping speed5500 sheets/h
Die-cutting accuracy≤±0.075 mm
Standard hot stamping accuracy≤±0.075 mm
Holographic registration precision≤±0.20 mm
Repeat registration accuracy≤±0.10 mm
Heating zone20 heating zones, heating temperature 20–200 °C
Feeder pile height1550 mm
Delivery pile height1400 mm
Main motor power18.5 kW
Max. total power143 kW
Total weight29 t
Overall dimensions7510×6250×2600 mm
Maximum foil roll diameterΦ250 mm (longitudinal) / Φ200 mm (transverse)
Compressed air requirements6–8 bar; 1100 L/min
Foil width20-920 mm

No video is available yet. We will gladly show and explain everything – write to us.

Send an inquiry
CATALOGUE
MACHINES
Sublimation printers
DTG printers
Eco-solvent printers
UV printers
Box makers
Screen printing and cold foil
Digital printing
Die-cutting and stripping machines
Folder-gluers
Flexo printing machines
Cutting plotters
Laminating machines
Gluing systems
Calendar binding and punching
Laser die-cutting machines
Coating machines
Slitters
Strapping machines
Cutters
Rewinders
Tape applicators
Creasing and perforating machines
Collating machines
Book edge printing
Window patching machines
Die-cutting machines with hot foil stamping
Inspection machines
Sheet-fed offset presses
Paper bag and sack making machines
Accessories
Saddle stitch booklet makers
Perfect binders
Sheeters