Home › Printing machines › Die-cutting machines with hot foil stamping › Dual-unit hot foil stamping and die-cutting machine Guowang S106YY

Dual-unit hot foil stamping and die-cutting machine Guowang S106YY

Dual-unit hot foil stamping and die-cutting machine Guowang S106YY

GUOWANG S106YY – Double-station hot foil stamping and die-cutting machine

The double-station automatic hot foil stamping and die-cutting machine is high-end equipment developed by Guowang Machinery Group on the basis of customer feedback and market demand, using the latest research and technology from China and abroad. It is a complete high-end system comprising hot stamping and die-cutting, and provides an ideal solution for repeated foil stamping or for hot foil stamping followed by stripping.

According to customer needs, the equipment can realize various combinations of large-area stamping, hot foil stamping, die-cutting and waste stripping, flexibly providing different functions and significantly improving performance and configuration options. The first unit can reach a maximum pressure of 320 t, easily handling large-area, full-sheet embossing and stamping requirements.

The machine is equipped with a pneumatic quick-lock system, a high-precision servo pressure regulating system and a fine-tuning system for short job changeovers, which greatly improves work efficiency and reduces production costs.

Versotrade s.r.o. is the official representative of the manufacturer GUOWANG (Guowang Group). We provide delivery, transport, installation, operator training as well as warranty and post-warranty service.

Interested in this machine? Write to us and we will prepare an offer.

Send an inquiry
Feeder section

Feeder section

In-house developed 4-suction, 4-feeder head feeds various stocks reliably; the pre-stacking device supports a pile height of 1600 mm without stopping the machine.

Paper conveying belt

Paper conveying belt

The paper feeding belt, with 6 imported front drive shafts and a German cross steel plate, guarantees flat paper conveyance.

Non-stop switching between the main and auxiliary feeding platforms

Non-stop switching between the main and auxiliary feeding platforms

Main and auxiliary feeding platforms support non-stop switching to save paper loading time and boost overall productivity.

Machine body section

Machine body section

5 main frames redesigned by German and Japanese engineers, Mitsubishi 5-face machining, ±0.01 mm tolerance, maximum die-cutting pressure of 550–600 t.

Main unit

Main unit

The main frame is made of premium materials. A high-efficiency, self-locking worm drive with a large reduction ratio and central metered lubrication reduce wear.

Machine base

Machine base

The integral cast base resists deformation, and the tongue-and-groove keyway connection ensures vertical balance during adjustment.

Pneumatic upper and lower lock

Pneumatic upper and lower lock

SMC pneumatic cylinders lock the upper and lower die frames firmly to prevent losses caused by manual operating errors.

Gripper bar section

Gripper bar section

Hard-anodized aerospace aluminum gripper bars with a flatness of ±0.05 mm, CMM inspected; Japanese gripper tips last 3 years.

Integrated electrical system

Integrated electrical system

The machine uses well-known brand electrical components to ensure stable long-term operation.

Transmission shaft

Transmission shaft

A high-torque drive shaft with dynamically balanced couplings ensures smooth, vibration-free operation and synchronous running of both units.

Feeder air valve assembly

Feeder air valve assembly

A precision air valve adjusts airflow to feed thin special paper stably, avoiding paper wrinkles, offset and feeding malfunctions.

Dual position adjustment for gripper bars

Dual position adjustment for gripper bars

Dual positioning screws allow quick, precise and easy adjustment of the gripper bars of both stations.

Thickened side wall plates

Thickened side wall plates

Heavy-duty thickened side plates and worm gears made of QT500-7 ductile iron with high tensile strength ensure stable operation.

Belt transmission

Belt transmission

Taiwanese intermittent mechanism with belt drive, running more smoothly than traditional chain transmission.

Automatic lubrication of cams and chains

Automatic lubrication of cams and chains

Automatic lubrication of cams and chains with uniform, precise oil supply and no manual work, increasing machine efficiency.

Miki clutch

Miki clutch

Equipped with a Miki clutch to control the feeding belt, allowing one unit to run while the other stands by.

Equipped with torque limiter

Equipped with torque limiter

A torque limiter protects the gripper bars from secondary collision for safe, stable and efficient production.

Integral machine base

Integral machine base

The highly rigid integral cast base absorbs die-cutting impact, and the adjustable clearance allows precise die-cutting.

Safety light curtain

Safety light curtain

A built-in high-safety light curtain monitors the danger zone, and the machine stops instantly to prevent accidents.

Hot stamping system

Hot stamping system

Energy-saving 20-zone heater with French sensors and Omron PID control (±1 °C), preheating function and automatic foil consumption calculation.

6 vertical and 6 holographic stamping lanes

6 vertical and 6 holographic stamping lanes

Simultaneous stamping of 6 vertical and 6 holographic lanes supports multiple processes in a single pass and raises equipment utilization.

ItemsS106YY
Paper sizeMin. 450×370 mm
Max. 1060×760 mm
Max. die-cutting area1045×745 mm
Maximum hot stamping area1040×740 mm
Gripper margin9-17 mm
Max. die-cutting pressure320 t (unit 1)
320 t (unit 2)
Paper specificationsPaperboard: 0.1–3 mm
Corrugated board: ≤4 mm
White paperboard: 90–2000 g/m²
Maximum die-cutting speed6500 sheets/h
Max. hot stamping speed5500 sheets/h
Max. holographic stamping speed5000 sheets/h
Die-cutting accuracy≤±0.075 mm
Standard hot stamping precision≤±0.075 mm
Holographic registration accuracy≤±0.20 mm
Repeat registration precision≤±0.10 mm
Heating zones20 heating zones, heating temperature 20–200 °C
Feeder pile height (including pallet)1600 mm
Delivery pile height (including pallet)1350 mm
Main motor power22 kW
Max. total power consumption145 kW
Total weight40 t
Overall dimensions8500×5400×2600 mm
Compressed air requirements6–8 bar; 1100 L/min
Max. foil roll diameterΦ250 mm (longitudinal) / Φ200 mm (transverse)
Foil width20-1060 mm
Foil feeding system (unit 1)3 longitudinal + 2 transverse
*Optional 4–6 rollers in the longitudinal direction
Foil feeding system (unit 2)3 longitudinal + 2 transverse
*Optional 4–6 rollers in the longitudinal direction

No video is available yet. We will gladly show and explain everything – write to us.

Send an inquiry
CATALOGUE
MACHINES
Sublimation printers
DTG printers
Eco-solvent printers
UV printers
Box makers
Screen printing and cold foil
Digital printing
Die-cutting and stripping machines
Folder-gluers
Flexo printing machines
Cutting plotters
Laminating machines
Gluing systems
Calendar binding and punching
Laser die-cutting machines
Coating machines
Slitters
Strapping machines
Cutters
Rewinders
Tape applicators
Creasing and perforating machines
Collating machines
Book edge printing
Window patching machines
Die-cutting machines with hot foil stamping
Inspection machines
Sheet-fed offset presses
Paper bag and sack making machines
Accessories
Saddle stitch booklet makers
Perfect binders
Sheeters