All-weather production: Almost no downtime due to foil breakage. No adjustment is required during production. The unique ergonomic design shortens installation time.
Perfect coordination of movements: The integrated transmission connecting rod structure ensures consistent, coordinated movement of the dual platforms, and dual encoder detection ensures the safety and reliability of the equipment.
Independent temperature zone control: The equipment uses 20 independently controlled temperature zones, which can be heated and regulated separately to save energy.
High parts commonality: The parts of the dual platforms are highly interchangeable, which facilitates maintenance, improves production efficiency and greatly reduces the number of parts and the material costs in the warehouse.
User-friendly operation: The hot stamping section uses a 19-inch high-definition touch screen, and all settings and functions are easily accessed by touch. Based on in-depth knowledge of the equipment, a unique operation and control system has been developed that is simple, intuitive and easy to operate.
Versotrade s.r.o. is the official representative of the manufacturer GUOWANG (Guowang Group). We provide delivery, transport, installation, operator training as well as warranty and post-warranty service.
Interested in this machine? Write to us and we will prepare an offer.
Send an inquiry
Main and auxiliary feeding platforms support non-stop switching to save paper loading time and boost overall productivity.

5 main frames redesigned by German and Japanese engineers, Mitsubishi 5-face machining, ±0.01 mm tolerance, maximum die-cutting pressure of 550–600 t.

The main frame is made of premium materials. A high-efficiency, self-locking worm drive with a large reduction ratio and central metered lubrication reduce wear.

The integral cast base resists deformation, and the tongue-and-groove keyway connection ensures vertical balance during adjustment.

SMC pneumatic cylinders lock the upper and lower die frames firmly to prevent losses caused by manual operating errors.

Hard-anodized aerospace aluminum gripper bars with a flatness of ±0.05 mm, CMM inspected; Japanese gripper tips last 3 years.

The machine uses well-known brand electrical components to ensure stable long-term operation.

A high-torque drive shaft with dynamically balanced couplings ensures smooth, vibration-free operation and synchronous running of both units.

A precision air valve adjusts airflow to feed thin special paper stably, avoiding paper wrinkles, offset and feeding malfunctions.

Dual positioning screws allow quick, precise and easy adjustment of the gripper bars of both stations.

Heavy-duty thickened side plates and worm gears made of QT500-7 ductile iron with high tensile strength ensure stable operation.

A torque limiter protects the gripper bars from secondary collision for safe, stable and efficient production.

Taiwanese intermittent mechanism with belt drive, running more smoothly than traditional chain transmission.

Automatic lubrication of cams and chains with uniform, precise oil supply and no manual work, increasing machine efficiency.

Equipped with a Miki clutch to control the feeding belt, allowing one unit to run while the other stands by.

The highly rigid integral cast base absorbs die-cutting impact, and the adjustable clearance allows precise die-cutting.

A built-in high-safety light curtain monitors the danger zone, and the machine stops instantly to prevent accidents.

Energy-saving 20-zone heater with French sensors and Omron PID control (±1 °C), preheating function and automatic foil consumption calculation.

Simultaneous stamping of 6 vertical and 6 holographic lanes supports multiple processes in a single pass and raises equipment utilization.
| Paper size | Min. 450×370 mm Max. 1060×760 mm |
| Max. die-cutting area | 1045×745 mm |
| Maximum hot stamping area | 1040×740 mm |
| Gripper margin | 9-17 mm |
| Max. die-cutting pressure | 300 t (unit 1) 300 t (unit 2) |
| Paper specifications | Paperboard: 0.1–3 mm Corrugated board: ≤4 mm White paperboard: 90–2000 g/m² |
| Maximum die-cutting speed | 6500 sheets/h |
| Max. hot stamping speed | 5500 sheets/h |
| Max. holographic stamping speed | 5000 sheets/h |
| Die-cutting accuracy | ≤±0.075 mm |
| Standard hot stamping precision | ≤0.075 mm |
| Holographic registration stamping precision | ≤0.20 mm |
| Heating zones (unit 1) | 20 heating zones, heating temperature 20–200 °C |
| Feeder pile height | 1600 mm |
| Delivery pile height | 1350 mm |
| Main motor power | 22 kW |
| Max. total power | 90 kW |
| Total weight | 37 t |
| Overall dimensions | 8500×5400×2600 mm |
| Max. foil roll diameter | Φ250 mm |
| Compressed air requirements | 6–8 bar; 600 L/min |
