The double-station automatic hot foil stamping and die-cutting machine is high-end equipment developed by Guowang Machinery Group on the basis of customer feedback and market demand, using the latest research and technology from China and abroad. It is a complete high-end system comprising hot stamping, die-cutting and waste stripping, and provides an ideal solution for repeated foil stamping or for hot foil stamping followed by stripping.
According to customer needs, the machine can realize various combinations of large-area hot foil stamping, deep embossing, die-cutting and waste stripping, switching flexibly between functions and significantly improving performance and configuration options. The first unit reaches a maximum pressure of 550 t, easily handling large-area, full-sheet, deep embossing and stamping requirements.
The machine is equipped with a pneumatic quick-lock system, a high-precision servo pressure regulating system and a fine-tuning system for short job changeovers, which greatly improves work efficiency and reduces production costs.
Versotrade s.r.o. is the official representative of the manufacturer GUOWANG (Guowang Group). We provide delivery, transport, installation, operator training as well as warranty and post-warranty service.
Interested in this machine? Write to us and we will prepare an offer.
Send an inquiry
In-house developed 4-suction, 4-feeder head feeds various stocks reliably; the pre-stacking device supports a pile height of 1600 mm without stopping the machine.

The paper feeding belt, with 6 imported front drive shafts and a German cross steel plate, guarantees flat paper conveyance.

Main and auxiliary feeding platforms support non-stop switching to save paper loading time and boost overall productivity.

5 main frames redesigned by German and Japanese engineers, Mitsubishi 5-face machining, ±0.01 mm tolerance, maximum die-cutting pressure of 550–600 t.

The main frame is made of premium materials. A high-efficiency, self-locking worm drive with a large reduction ratio and central metered lubrication reduce wear.

The integral cast base resists deformation, and the tongue-and-groove keyway connection ensures vertical balance during adjustment.

SMC pneumatic cylinders lock the upper and lower die frames firmly to prevent losses caused by manual operating errors.

Hard-anodized aerospace aluminum gripper bars with a flatness of ±0.05 mm, CMM inspected; Japanese gripper tips last 3 years.

The machine uses well-known brand electrical components to ensure stable long-term operation.

A high-torque drive shaft with dynamically balanced couplings ensures smooth, vibration-free operation and synchronous running of both units.

A precision air valve adjusts airflow to feed thin special paper stably, avoiding paper wrinkles, offset and feeding malfunctions.

Dual positioning screws allow quick, precise and easy adjustment of the gripper bars of both stations.

Heavy-duty thickened side plates and worm gears made of QT500-7 ductile iron with high tensile strength ensure stable operation.

A torque limiter protects the gripper bars from secondary collision for safe, stable and efficient production.

Taiwanese intermittent mechanism with belt drive, running more smoothly than traditional chain transmission.

Automatic lubrication of cams and chains with uniform, precise oil supply and no manual work, increasing machine efficiency.

Equipped with a Miki clutch to control the feeding belt, allowing one unit to run while the other stands by.

The highly rigid integral cast base absorbs die-cutting impact, and the adjustable clearance allows precise die-cutting.

A built-in high-safety light curtain monitors the danger zone, and the machine stops instantly to prevent accidents.

Energy-saving 20-zone heater with French sensors and Omron PID control (±1 °C), preheating function and automatic foil consumption calculation.

Simultaneous stamping of 6 vertical and 6 holographic lanes supports multiple processes in a single pass and raises equipment utilization.
| Items | S106DYDHQ |
| Paper size | Min. 450×370 mm Max. 1060×760 mm |
| Max. die-cutting area | 1045×745 mm |
| Maximum hot stamping area | 1040×740 mm |
| Gripper margin | 9-17 mm |
| Max. die-cutting pressure | 550 t (unit 1) 320 t (unit 2) |
| Paper specifications | Paperboard: 0.1–3 mm Corrugated board: ≤4 mm White paperboard: 90–2000 g/m² |
| Maximum die-cutting speed | 6500 sheets/h |
| Max. hot stamping speed | 5500 sheets/h |
| Max. holographic stamping speed | 5000 sheets/h |
| Die-cutting accuracy | ≤±0.075 mm |
| Standard hot stamping precision | ≤0.075 mm |
| Holographic registration stamping precision | ≤0.20 mm |
| Heating zone (1st unit) | 20 heating zones, heating temperature 20–200 °C |
| Heating zone (2nd unit) | 6 heating zones, heating temperature 20–120°C |
| Feeder pile height | 1600 mm |
| Delivery pile height | 1350 mm |
| Main motor power | 22 kW |
| Max. total power | 108 kW |
| Total weight | 42 t |
| Overall dimensions | 8500×5400×2600 mm |
| Max. foil roll diameter | Φ250 mm |
| Compressed air requirements | 6–8 bar; 600 L/min |
No video is available yet. We will gladly show and explain everything – write to us.
Send an inquiry