Safety: a complete safety monitoring system protects operators and equipment in real time, so you can work without safety concerns.
High parts commonality: the parts of the two platforms are largely interchangeable, which simplifies maintenance, improves production efficiency and greatly reduces the number of spare parts and the material costs in the warehouse.
Perfectly coordinated movements: the integrated transmission connecting-rod structure ensures consistent, coordinated movement of the two platforms, and dual encoder detection ensures the safety and reliability of the machine.
Double the efficiency: the dual-platform design doubles efficiency, greatly reduces costs and makes your products more competitive.
User-friendly operation: The hot stamping section uses a 19-inch high-definition touch screen, and all settings and functions are easily accessed by touch. Based on in-depth knowledge of the equipment, a unique operation and control system has been developed that is simple, intuitive and easy to operate.
Versotrade s.r.o. is the official representative of the manufacturer GUOWANG (Guowang Group). We provide delivery, transport, installation, operator training as well as warranty and post-warranty service.
Interested in this machine? Write to us and we will prepare an offer.
Send an inquiry
In-house developed 4-suction, 4-feeder head feeds various stocks reliably; the pre-stacking device supports a pile height of 1600 mm without stopping the machine.

The paper feeding belt, with 6 imported front drive shafts and a German cross steel plate, guarantees flat paper conveyance.

Main and auxiliary feeding platforms support non-stop switching to save paper loading time and boost overall productivity.

5 main frames redesigned by German and Japanese engineers, Mitsubishi 5-face machining, ±0.01 mm tolerance, maximum die-cutting pressure of 550–600 t.

The main frame is made of premium materials. A high-efficiency, self-locking worm drive with a large reduction ratio and central metered lubrication reduce wear.

The integral cast base resists deformation, and the tongue-and-groove keyway connection ensures vertical balance during adjustment.

SMC pneumatic cylinders lock the upper and lower die frames firmly to prevent losses caused by manual operating errors.

Hard-anodized aerospace aluminum gripper bars with a flatness of ±0.05 mm, CMM inspected; Japanese gripper tips last 3 years.

The machine uses well-known brand electrical components to ensure stable long-term operation.

A high-torque drive shaft with dynamically balanced couplings ensures smooth, vibration-free operation and synchronous running of both units.

A precision air valve adjusts airflow to feed thin special paper stably, avoiding paper wrinkles, offset and feeding malfunctions.

Dual positioning screws allow quick, precise and easy adjustment of the gripper bars of both stations.

Heavy-duty thickened side plates and worm gears made of QT500-7 ductile iron with high tensile strength ensure stable operation.

A torque limiter protects the gripper bars from secondary collision for safe, stable and efficient production.

Taiwanese intermittent mechanism with belt drive, running more smoothly than traditional chain transmission.

Automatic lubrication of cams and chains with uniform, precise oil supply and no manual work, increasing machine efficiency.

Equipped with a Miki clutch to control the feeding belt, allowing one unit to run while the other stands by.

The highly rigid integral cast base absorbs die-cutting impact, and the adjustable clearance allows precise die-cutting.

A built-in high-safety light curtain monitors the danger zone, and the machine stops instantly to prevent accidents.

Energy-saving 20-zone heater with French sensors and Omron PID control (±1 °C), preheating function and automatic foil consumption calculation.

Simultaneous stamping of 6 vertical and 6 holographic lanes supports multiple processes in a single pass and raises equipment utilization.
| Paper size | Min. 450×370 mm Max. 1060×760 mm |
| Paper specifications | Paperboard: 0.1–3 mm Corrugated board: ≤4 mm White paperboard: 90–2000 g/m² |
| Maximum die-cutting format | 1045×745 mm |
| Gripper margin | 9-17 mm |
| Heating zone | Unit 1: 6 temperature zones, heating temperature 20–120 °C Unit 2: – |
| Maximum die-cutting pressure (unit 1) | 550 t |
| Maximum die-cutting pressure (unit 2) | 320 t |
| Maximum die-cutting speed | 6500 sheets/h |
| Die-cutting accuracy | ≤±0.075 mm |
| Feeder pile height (including pallet) | 1600 mm |
| Delivery pile height (including pallet) | 1350 mm |
| Inner dimensions of die chase | 1100×770 mm |
| Compressed air requirements | 6–8 bar; 600 L/min |
| Main motor power | 22 kW |
| Maximum total power | 50 kW |
| Total weight (including footboard) | 38 t |
| Overall dimensions | 8500×5400×2600 mm |
No video is available yet. We will gladly show and explain everything – write to us.
Send an inquiry